Vinyl flooring is a trendy and affordable option that provides sturdiness and lengthy-lasting efficiency. One other downside with laying over existing vinyl is that if the decrease layer is patterned, the texture will finally present by your top layer. Vinyl flooring could be laid on high of concrete, but again, uniformity and smoothness is usually a drawback. Some producers offer do-it-yourself set up kits, but many householders choose to use a contractor in an effort to achieve a smooth, professional look. If the existing vinyl flooring was put in over concrete and is glued down firmly, you must be able to tile proper over it without any drawback.
If the vinyl was utilized over a wooden subfloor, you must set up 1/2” thick cement backer board on top of it first, utilizing corrosion resistant screws driven into the ground joists. Another choice to backer board on wooden flooring is without doubt one of the new polyethylene membranes equivalent to Schluter®-DITRA. You need to be capable of set up a laminate ground over linoleum or vinyl so long as the previous flooring is attached firmly and in good situation.
Check to set up instructions that come with the laminate flooring for specific suggestions. Sure, you possibly can tile over existing vinyl flooring that was laid on concrete so long as it is firmly hooked up to the subfloor. If the vinyl is securely glued to the subfoor and the floor feels firm with no flex in to it, it must be okay to tile over it. If the outdated vinyl is in good condition and glued down firmly with no seams popping up or holes, then you may put a new layer of vinyl flooring over a present layer. In fact with laminate, you won’t glue the flooring down, such as you would with wood or engineered wooden flooring.
If the vinyl tile are nicely attached to the subfloor and never peeling up across the edges, it is best to have the ability to tile over it. Good luck together with your project! I need to retile a rest room with ceramic or porcelain tile and the house was built within the 60’s and I am certain that the vinyl that was initially put in contains asbestos. If your tile ground is level and even, you should be capable of set up laminate flooring over it. Try our article on Laying Wood Flooring Over Tile to find out extra.
The good news is that so long as it stays undisturbed, the EPA is okay with you overlaying it. I think you’ll safely tile over the vinyl and encapsulate any remaining fears. I might be to take up the vinyl and one layer of plywood, then put down 1/2″ cement backer board and tile on prime of the 3/four″ plywood subfloor. Relying on the specific sort of flooring, you might be able to lay a laminate flooring straight over vinyl flooring. If the vinyl is on a concrete slab, and there may be moisture below the floor, you must put down a layer of 6 mil plastic first. See the set up instructions that came with your flooring to seek out out extra.